NEXT Flight-Case for 2 x LAm114xA

NEXT Flight-case for 3 x LA122 Series + Flying Frame Light

NEXT Flight-Case for 2 x LA122W/ WA - Front Fill

NEXT Flight-Case for cable Kits (238L)

NEXT Flight-case for 2 x LA122 Series + Flying Frame Light

NEXT Flight-Case for 4 x X8

NEXT Flight-Case para 2 x HFA212 / HFA212W

NEXT Flight-case for 4 x HFA108

NEXT Flight-case for 2 x HFA112

NEXT Flight-case for 2 x X12

NEXT Flight-case for 3 x LA26

NEXT Flight-case for 4 x LA26

NEXT Flight-case for 3 x LA26+Flying Frame+G.Stack+F.Adapter

NEXT Flight-case for 4 x LA26+Flying Frame+G.Stack+F.Adapter

NEXT Flight-Case for 2 x LA26 Flying Frame + 2 x F. Adapter

NEXT Flight-Case for 2 x LA26 U-Bracket + 2 x G. Stack

NEXT Flight-case for 2 x Flying Frame HD LA122 Series

NEXT Flight-Case for HFA26.12 System (2xHFA206p + 2xHFA112s)

Amplifier Technology: 2 channel switched mode class AB with DSP
LF Section Power
RMS: 400W / Program: 540W / Peak: 1080W
HF Section Power
RMS: 100W / Program: 135W / Peak: 270W
Maximum SPL (calculated)
122dB / 128dB (Full-Space)
Low Frequency Driver: 1 x 8" (200mm) / 2" (51mm) voice coil, B&C custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Dimensions (WxHxD): 244 x 451 x 288 mm
Net Weight: 11.9kg
Shipping Weight: 13.4kg

TECHNICAL SPECIFICATIONS
Product Type: Active Band-Pass Subwoofer
Frequency Response (-6dB): 40Hz - X-over
Low Frequency Extension (-10dB): 34Hz
Frequency / Type of X-Over: Defined by Preset or user adjustable by PC
Amplifier Technology: 2 channel switched mode class D with DSP
Amplifier Power: 1650Wrms
Subwoofer Amplifier Power: RMS: 1100W / Program: 1480W / Peak: 2960W
External Satellite Amplifier Power: RMS: 550W / Program: 740W / Peak: 1480W @ 4Ω
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets
6 Factory and 2 User, selectable via software or rear panel switch
Control Type
Via RS485 and supplied software "SOUNDWARE"
Maximum SPL (calculated)
130dB / 136dB (Half-Space)
Subwoofer Driver
1 x 12" (300mm) / 3.5" (88mm) VC, Neodymium, long excursion, B&C custom speaker
Cooling Type: Convection/Temperature controlled fan
Power Input: 180V - 245V
Mains Connector
Powercon (Input and Output)
Power Consumption: 770W
Fittings: 1 x 35mm Pole Mount Socket
Handles: 2 on the upper side edges (Black or red)
Construction: 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 349 x 512 x 550 mm
Net Weight: 25.2kg
Shipping Weight: 27.4kg

TECHNICAL SPECIFICATIONS
Product Type: Active Reflex Subwoofer
Frequency Response (-6dB): 32Hz - X-over
Amplifier Technology: 2 channel switched mode class D with DSP
Subwoofer Amplifier Power: RMS: 1100W / Program: 1480W / Peak: 2960W
External Satellite Amplifier Power
RMS: 550W / Program: 740W / Peak: 1480W @ 4Ω
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 130.7dB / 136.7dB (Half-Space)
Subwoofer Driver: 1 x 15" (380mm) / 4" (100mm) VC, high excursion B&C custom speaker
Input Connectors
Signal: 2 x XLR ; Power: 2 x powerCON ; Output to external satellite: 1 x NL4
Power Input: 180V - 245VAC
Power Consumption: 770W
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 448 x 556 x 511 mm
Net Weight: 37.1kg

TECHNICAL SPECIFICATIONS
Product Type: Active High Power 2.5-Way Wide Speaker
Frequency Response (-6dB): 45Hz - 18.000Hz
Nominal Coverage (-6dB): 80º x 60º User Rotatable
Amplifier Technology: 3 channel switched mode class D with DSP
LF Section Power: RMS: 2 x 550W / Program: 2 x 740W / Peak: 2 x 1480W
HF Section Power: RMS: 550W / Program: 740W / Peak: 1480W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or near panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 130.5dB / 136.5dB (Full-Space)
Low Frequency Driver: 2 x 12" (300mm) / 3" (76mm) VC, B&C custom speaker
High Frequency Driver: 1 x 1.4" (36mm) exit / 2.5" (65mm) voice coil, custom compression driver
Input Connectors :Signal: 2 x XLR ; Power: 2 x powerCON
Power Input :180V - 245VAC
Power Consumption :770W
Dimensions (WxHxD) :365 x 938 x 378 mm
Net Weight: 33kg
Shipping Weight: 35.7kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 110º x 90º
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB / 107dB (Full-Space)
Low Frequency Driver: 1 x 4" Speaker
High Frequency Driver: 1 x 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: Please consult your NEXT-proaudio Dealer: Grille
Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 140 x 230 x 172 mm
Net Weight: 2.8kg
Shipping Weight: 7kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 110º x 90º
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB / 107dB (Full-Space)
Low Frequency Driver: 1 x 4" Speaker
High Frequency Driver: 1 x 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Please consult your NEXT-proaudio Dealer: Grille
Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 140 x 230 x 172 mm
Net Weight: 2.8kg
Shipping Weight: 7kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100º x 75º
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 108dB / 111dB (Full-Space)
Low Frequency Driver: 1 x 6.5" Speaker
High Frequency Driver: 1 x 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: Please consult your NEXT-proaudio Dealer
Grille: Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 182 x 362 x 226 mm
Net Weight: 6.5kg
Shipping Weight: 15.6kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100º x 75º
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 108dB / 111dB (Full-Space)
Low Frequency Driver: 1 x 6.5" Speaker
High Frequency Driver: 1 x 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Please consult your NEXT-proaudio Dealer
Grille: Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 182 x 362 x 226 mm
Net Weight: 6.5kg
Shipping Weight: 15.6kg

Maximum SPL (calculated): 116dB / 119dB (Full-Space)
Low Frequency Driver: 1 x 8" Speaker
High Frequency Driver: 1 x 1" Driver
Dimensions (WxHxD): 240 x 450 x 287 mm
Net Weight: 10.7kg
Shipping Weight: 12.2kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 55Hz - 18kHz
Nominal Coverage (-6dB): 100º x 70º
RMS Power: 150W
Program Power: 300W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 116dB / 119dB (Full-Space)
Low Frequency Driver: 1 x 8" Speaker
High Frequency Driver: 1 x 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Please consult your NEXT-proaudio Dealer
Grille: Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 240 x 450 x 287 mm
Net Weight: 10.7kg
Shipping Weight: 12.2kg

K10s Passive Front-Loaded Subwoofer
Custom 1x10"
500W, 8Ω, 129dB Peak

TECHNICAL SPECIFICATIONS
Product Type: Active 2-Way Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Nominal Coverage (-6dB): 90º x 8º or 120º x 8º with optional accessory
Amplifier Technology: 2 channel switched mode class D with DSP
LF Section Power: RMS: 1100W / Program: 1480W / Peak: 2960W
HF Section Power: RMS: 550W / Program: 740W / Peak: 1480W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 129dB / 135dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 2 x 1.4" (36mm) exit / 2.5" (65mm) VC, B&C custom compression driver
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Power Input: 180V - 245VAC
Power Consumption: 770W
Dimensions (WxHxD): 602 x 350 x 465 mm
Net Weight: 36kg