Product Type: Electronicaly balanced
Frequency Response (-6dB): 0.5dB (20Hz to 20.000Hz)
Amplifier Gain: -40dB to +6dB in 0.1dB steps
THD+N: 0.005% (1.000Hz at +4dBu)
Common Mode Rejection Ratio (CMRR): >102dB (50Hz to 10.000Hz)
Crosstalk: â¤100dB
Input Impedance: >10kΩ
DSP Technology: 48kHz/24-Bit 40Bit floating point
Latency: 1,5ms
DSP Presets: 30
Delay Adjustment: Up to 6.979ms (2.397m) per output
Input Connectors: 3 pin XLR
Power Input: 90-250 VAC (50Hz - 60Hz) - 18VA
Mains Connector: Standard IEC socket
Dimensions (WxHxD): 483mm x 168mm x 44.5mm
Net Weight: 3,6kg

TECHNICAL SPECIFICATIONS
Product Type: Active High Power 2-Way Speaker
Frequency Response (-6dB): 55Hz - 19.000Hz
Low Frequency Extension (-10dB): 46Hz
Nominal Coverage (-6dB): 50-100º x 50º User Rotatable, Tailored Dispersion Technology
Frequency / Type of X-Over: 2.2kHz, 24dB/oct Linkwitz-Riley
Amplifier Technology
2 channel switched mode class D with DSP
Amplifier Power: 1650Wrms
LF Section Power: 1100Wrms
HF Section Power: 550Wrms
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters
6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 127dB / 133dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, high excursion B&C custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.7" (44mm) VC, B&C custom compression driver
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Cooling Type: Convection/Temperature controlled fan
Power Input: 180V - 245V
Mains Connector: Powercon (Input and Output)
Power Consumption: 770W
Fittings: 16 x M8 threaded inserts, 1 x 35mm pole mount socket
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm multi-laminate birch ply
Finish
Semi-Matte Black Textured Coating
Dimensions (WxHxD): 365 x 635 x 378 mm
Net Weight: 25kg
Shipping Weight: 27kg

Product Type: Active Reflex Subwoofer
Frequency Response (-6dB): 32Hz - X-over
Amplifier Technology: 2 channel switched mode class D with DSP
Subwoofer Amplifier Power: RMS: 1100W / Program: 1480W / Peak: 2960W
External Satellite Amplifier Power: RMS: 550W / Program: 740W / Peak: 1480W @ 4Ω
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 130.7dB / 136.7dB (Half-Space)
Subwoofer Driver: 1 x 15" (380mm) / 4" (100mm) VC, high excursion B&C custom speaker
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON ; Output to external satellite: 1 x NL4
Power Input: 180V - 245VAC

TECHNICAL SPECIFICATIONS
Product Type: Active Hybrid-Horn Subwoofer
Frequency Response (-6dB): 38Hz - X-over
Amplifier Technology: Switched mode class D with DSP
Amplifier Power: RMS: 2200W / Program: 2960W / Peak: 5920W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or near panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 135dB / 141dB (Half-Space)
Subwoofer Driver: 1 x 18" (460mm) / 4" (100mm) VC, high excursion B&C custom speaker
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Power Input: 180V - 245VAC
Power Consumption: 770W
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 602 x 662 x 746 mm
Net Weight: 57.4kg
Shipping Weight: 60.3kg

Product Type: Passive Two-way Vertical Array
Frequency Response (-6dB): 80Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 40º user rotatable
Program Power: 500W
Nominal Impedance: 4Ω
Sensitivity (1W, 1m): 95dB (Full-Space)
Maximum SPL (calculated): 121dB / 127dB (Full-Space)
Low Frequency Driver: 2 x 6.5" (170mm) / 1.5" (38mm) voice coil, custom speakers
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4

Passive Front-Loaded Subwoofer
B&C Custom 1x12"
1400W, 8Ω, 125.5dB Peak

Product Type: Passive Coaxial Reflex Speaker
Frequency Response (-6dB): 112Hz - 18.000Hz
Low Frequency Extension (-10dB): 70Hz
Nominal Coverage (-6dB): 80º Conical
Program Power: 200W
Nominal Impedance: 8Ω
Recommended High-Pass Filter: 65Hz
Sensitivity (1W, 1m): 91dB (Full-Space)
Maximum SPL (calculated): 114dB / 117dB (Full-Space)
Low Frequency Driver: 1 x 5" (127mm) / 1.7" (44mm) VC, B&C Custom Speaker
High Frequency Driver: 1 x 1" (25mm) / 1" (25mm) VC, B&C Compression Driver
Input Connectors: 2 x Neutrik NL4; 2x Screw Terminal
Recommended Amplifier: MA900
Dimensions (WxHxD): 170 x 170 x 187 mm
Net Weight: 3.3kg

Product Type: Class D Amplifier with DSP, 4*750w (4ohm) or 2*1500w (100v)
Frequency Response: 20Hz - 20kHz (+0 / -0.5dB)
Audio Signal Inputs: 4 x Analog Unbalanced Inputs | 4 x Analog Balanced Inputs | Stereo S/PDIF
Input Connectors: 4 x RCA | 2 x 6-Pole 3.5mm Phoenix Type | 1 x RCA | 8 x GPIO
Audio Signal Outputs: Stereo S/PDIF
Output Connectors: 1 x RCA | 8 x GPIO
Speakers Output Connectors: 2 x 4-Pole 5mm Phoenix Type
Protections: Short Circuit, DC, Undervoltage, Temperature and Overload Protection
Power Input: AC 100V - 240V 50Hz/60Hz
Update to Firmware 1.4.2 necessary

Product Type: 2U Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Power Input: 230VAC, 50Hz-60Hz (others by request)

Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF

Power Input: 230VAC, 50Hz-60Hz (others by request)
Dimensions (WxHxD): 483mm x 465mm x 88,8mm
Net Weight: 23.2kg
Shipping Weight: 24.8kg

Product Type: 3U Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Amplifier Technology: Class H
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female & Male XLR-3
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Power Input: 230VAC, 50Hz-60Hz (others by request)

Product Type: 2U Professional Amplifier
Frequency Response (-6dB): 15Hz - 25.000Hz (+0 / -1dB)
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Cooling Type: Front to back via 2 variable speed fans
Power Input: 230VAC, 50Hz-60Hz (others by request)

NEXT U-Shape Bracket for K5 / K5+

NEXT U-Shape Bracket for X8

TECHNICAL SPECIFICATIONS
Product Type: Active Two-Way Speaker/Monitor
Frequency Response (-6dB): 54Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Amplifier Technology: 2 channel switched mode class AB with DSP
LF Section Power
RMS: 400W / Program: 540W / Peak: 1080W
HF Section Power: RMS: 100W / Program: 135W / Peak: 270W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 126dB / 132dB (Full-Space)
Low Frequency Driver: 1 x 15" (380mm) / 3" (76mm) voice coil, custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Power Input: 90V - 245V
Mains Connector: Signal: 2 x XLR ; Power: 2 x powerCON
Power Consumption: 550W
Dimensions (WxHxD): 431 x 654 x 440 mm
Net Weight: 25.7kg
Shipping Weight: 28.5kg

TECHNICAL SPECIFICATIONS
Product Type: Active Reflex Subwoofer
Frequency Response (-6dB): 36Hz - X-over
Amplifier Technology: 2 channel switched mode class D with DSP
Amplifier Power: RMS: 2200W / Program: 2960W / Peak: 5920W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 136dB / 142dB (Half-Space)
Subwoofer Driver: 1 x 18" (450mm) / 4" (100mm) voice coil, long excursion, B&C custom speaker
Power Input: 180V - 245V
Mains Connector: Signal: 2 x XLR ; Power: 2 x powerCON;
Power Consumption: 770W
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 525 x 703 x 735 mm
Net Weight: 47.9kg

TECHNICAL SPECIFICATIONS
Product Type: Passive Reflex Subwoofer
Frequency Response (-6dB): 36Hz - X-over
Low Frequency Extension (-10dB): 103dB (Half-Space)
Program Power: 2400W
Peak Power: 4800W
Nominal Impedance: 8Ω
Maximum SPL (calculated): 136.8dB / 142.8dB (Half-Space)
Subwoofer Driver: 1 x 18" (450mm) / 4" (100mm) voice coil, long excursion, B&C custom speaker
Mains Connector: Signal: 2 x Neutrik NL4
Recommended Amplifier: MA6000 / MA3200 (Bridge)
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 525 x 703 x 735 mm
Net Weight: 44.8kg

NEXT Individual Cover for HFA115s/HP to use with Wheel Kit

Product Type: Passive High Performance Full-Range Speaker/Monitor
Frequency Response (-6dB): 72Hz - 20.000Hz
Low Frequency Extension (-10dB): 64Hz
Nominal Coverage (-6dB): 90º x 60º rotatable, constant directivity
Program Power: 400W Peak Power 800W
Nominal Impedance 8Ω
Frequency / Type of X-Over: 2500Hz / asymetrical (internal)
Recommended High-Pass Filter: 55Hz, 18dB/oct Butterworth
Sensitivity (1W, 1m): 94dB (Full-Space)
Maximum SPL (calculated): 120dB / 126dB (Full-Space)
Low Frequency Driver: 1 x 8" (200mm) / 2" (50mm) VC, B&C custom speaker
High Frequency Driver
1 x 1" (25mm) exit / 1.4" (36mm) VC, B&C custom compression driver
Input Connectors: 2 x Neutrik NL4 parallel wired
Recommended Amplifier: MA1700 / MA900
Fittings: 16 x M6 threaded inserts, 1 x 35mm pole mount socket
Grille: Black Perforated Steel
Construction: 12mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 254 x 451 x 238 mm
Net Weight: 8.9kg

NEXT Flight-case for 2 x PFA8 / PFA8p

NEXT Flight-case for 4 x M8

NEXT Flight-case for 4 x HFA206 / HFA206p

NEXT Flight-Case for 2 x HFA115

NEXT Flight-case for 2 x PFA12 / PFA12p

NEXT Flight-case for 2 x PFA15 / PFA15p

NEXT Flight-case for 4 x K5 / K5+

NEXT Flight-Case for 2 x X15

NEXT Flight-case for 2 x Flying Frame LA212x